Alcatel-Lucent Cellpipe 7130 Residential Gateway WAN Configration

1. Open web browser and enter the ip address of Cellpipe 7130 Residential Gateway in address bar 192.168.1.1 and press enter key 
2. You should see a dialog box pop up asking your for your  Cellpipe-7130 username and password
3. Enter the user name "admin"and password "admin" and press enter key for login if authentication failed then try the user name "admin"and password "user"
4. Click on Network and then click on WAN PTM Connections

1. Enter the Interface name
2. In mode option select PPPOE
3. Select Port Based option
4. Click on Add button

1. Select Always use ID
2. Enter the ID (Its VLAN ID provided by service provider)
3. Enter the User name
4. Enter the Password
5. Select Always on option
6. Select CHAP+PAP
7. Select MTU Auto
8. Click on Next button 

1. Click on Save button

 Now WAN configuration has been completed

Tplink TL-WR740N Access Point Quick-setup

Connect the Internet cable with Tplink TL-WR740N Access Point via WAN port. Connect the PC with Tplink TL-WR740N Access Point via LAN then follow the below steps

In Web browser enter the AP IP address 192.168.0.1 and press enter key from the keyboard. Enter the username and password admin and press enter key to login

1. Click on Quick Setup 
2. Click on next button

1. In WAN connection type select Dynamic IP
2. Click on Next button

ZXDSL-831CII Configration By Quick Start

In web brower address bar type the modem IP address 192.168.1.1 and press enter key then type the username and password admin then press enter to login

1. Click on Quick Start button
2. Click on the next button

1. In ISP connection type select PPPOE/PPPOA 
2. Click on Next button

Zyxel P-660R Series Modem Configration

Open web browser and enter modem IP address 192.168.1.1 in web browser and enter username "admin" and password "admin" for login.

1. After login click on "+Quick Start"  
2. Click on "Quick Start"
3. Click on "Run Wizard" button

After clicking on Run Wizard button and new window appears

1. Click on Next button

EchoLife HG520c Modem Wireless LAN Settings

1. Open web browser and in address bar enter the IP address 192.168.1.1 and press enter button then enter the username and password "admin" and click on login buttonthen click on "+ Basic "  
2. Click on "Wireless Lan" Option
3. In access point option select "Enable"
4. Select the country "Pakistan"
5. Enter the SSID (any name)