Alcatel-Lucent Cellpipe 7130 Residential Gateway WAN Configration

1. Open web browser and enter the ip address of Cellpipe 7130 Residential Gateway in address bar 192.168.1.1 and press enter key 
2. You should see a dialog box pop up asking your for your  Cellpipe-7130 username and password
3. Enter the user name "admin"and password "admin" and press enter key for login if authentication failed then try the user name "admin"and password "user"
4. Click on Network and then click on WAN PTM Connections

1. Enter the Interface name
2. In mode option select PPPOE
3. Select Port Based option
4. Click on Add button

1. Select Always use ID
2. Enter the ID (Its VLAN ID provided by service provider)
3. Enter the User name
4. Enter the Password
5. Select Always on option
6. Select CHAP+PAP
7. Select MTU Auto
8. Click on Next button 

1. Click on Save button

 Now WAN configuration has been completed